1. Material selection of brass drawing parts Brass drawn parts are widely used in machinery manufacturing, automobiles, electronics, construction and other fields, mainly because brass has good mechanical properties and corrosion resistance.
The following factors are mainly considered when selecting the material of brass drawing parts:
1.1 Corrosion resistance: Choosing materials with good corrosion resistance can increase the service life of tensile parts in harsh environments.
1. 2 Strength: Choosing materials with appropriate strength can ensure that the tensile parts will not deform during use.
1. 3 Lifespan: Choosing materials with longer life can reduce the cost of maintenance and replacement of tensile parts. Common brass drawing parts materials currently on the market include: C26000, C27000, C28000, C34500, C36000, etc. Different materials have different properties and prices. It is important to choose the appropriate material according to actual needs.
2. Size selection of brass drawing parts The size selection of brass drawing parts needs to be determined according to the actual use scenario.
Usually we need to pay attention to the following points:
2.1 Diameter: The diameter needs to be selected according to the hole diameter of the connected parts, which is usually slightly larger than the hole diameter of the parts.
2. 2 Length: The length needs to be selected according to the thickness of the connected parts and the width of the connector.
2.3 Strength: Strength needs to be selected according to the force exerted on the connection to ensure that the tensile member can withstand and transmit the force. Common brass drawing parts sizes include: M3, M4, M5, M6, M8, M10, etc. The size needs to be determined based on the connected parts and specific usage scenarios. It should be noted that tensile parts of different sizes will have different effects on the strength of the connecting parts when used.
The appropriate size should be selected according to the actual situation. To sum up, when choosing a suitable model of brass tensile parts, you need to consider factors such as material and size, and make a reasonable selection based on actual needs to ensure the strength and service life of the connector.
