Process Requirements For Curved Stamping Parts

Process requirements for curved stamping parts. When a metal stamping parts processing factory processes curved stamping parts, the process requirements are as follows:
1. The material selection must be reasonable, and materials with high plasticity and low elasticity should be selected as much as possible to ensure the shape accuracy and dimensional accuracy of the workpiece;
2. The bending radius of the workpiece should not be less than the minimum allowable bending radius;
3. The structural design of the workpiece must be reasonable. For example, holes and grooves on the workpiece should be kept away from the bending deformation area. Curved straight edges should be of sufficient height to maintain the integrity of the formed shape.
4. Appropriately add process holes and grooves to cut off the fibers in the deformation zone and the non-deformation zone to prevent tearing due to the forming of the bending part.