Precautions For Processing Aluminum Stamping Parts

Precautions for processing aluminum stamping parts:
1. The material thickness of aluminum stamping parts, if possible, use materials with smaller thickness;
2. Choose an aluminum plate with appropriate hardness, because if the hardness of the aluminum plate is too high, cracking will easily occur during stamping processing, and the quality of aluminum stamping parts cannot be guaranteed.
3. When processing aluminum stamping parts, the stamping direction should be perpendicular to the rolling grain direction of the aluminum plate;
4. When bending aluminum stamping parts, you must choose a suitable R angle. If the R angle is too small, cracking may easily occur during bending;
5. Aluminum stamping parts are usually surface treated after forming.
When processing aluminum stamping parts, you must be familiar with the characteristics of the aluminum material, and consider in advance how to ensure that adverse phenomena are avoided during the stamping process.