1. When the general sheet material is used for precision stamping, the scrap of metal stamping parts is conveyed by the conveyor belt, cut short by the scrap cutter, and then restricted into boxes by the press; Precision stamping
2. Winding the waste with the receiving drum, in fact, the appearance of the receiving drum is almost the same as that of the strip steel drum. The waste after the receiving drum winding of the metal stamping parts can be used as the material of other parts, because the receiving drum motor is independently driven, it can also be driven by the press or feeding mechanism;
3. A cutter is set on the metal precision stamping processing mold to block off the waste, and then conveyed to the baler by the conveyor belt. We should pay attention to the separation of a distance when pressing the press.
