1. Before starting the machine, check the bending equipment used to confirm that there is no problem before starting the machine, so as to avoid danger;
2. When the equipment is in the open state, do not reach in from the knife edge of the bending machine to adjust the rear gear, but go directly to the back of the equipment for adjustment;
3. When processing parts, the human body should be outside the range of activity of the parts to avoid scraping the parts to the human body;
4. When processing large parts, the human body stands on the side of the workpiece to facilitate operation. At the same time, it is necessary to help the workpiece to avoid breaking or hurting it.
5. In the process of machine tool processing, if an emergency needs to stop the operation immediately, turn off the equipment switch;
6. When operating close to the blade, both hands should be placed against the appropriate position of the lower die to avoid the accidental extension of fingers into the blade;
7. When the sheet metal is bent, the sheet metal workpiece should be put well and the hand balance of the machine tool should be kept.
8. The removed bending tool can not be placed on the bending machine, nor can it be relied on the bending machine to avoid slipping and injuring the human body.
