Matters Needing Attention For Rust Prevention Of Stamping Parts

Matters needing attention for rust prevention of stamping parts
It needs to be determined according to the specific manufacturer, processing procedures and specific needs! If the workpiece needs to be rust-proof during the stamping process, it is recommended to use rust-proof stamping oil with rust-proof function! After the workpiece is stamped, if rust prevention is required, it is recommended to use special rust-proof oil at this time. The specific type of rust-proof oil can be determined according to the situation.
The stamping oil and stamping cleaning oil remaining in the stamping parts during the processing are usually retained on the stamping parts for 1~2 months of rust prevention. During this period, the factory usually keeps the stamping parts and performs rust prevention treatment. For example, the later packaging of automotive stamping parts is box packaging, overall rust-proof film, and internal auxiliary other rust-proof methods, achieving a rust-proof period of about 1 year, which fully meets the requirements of sea transportation and storage.
After the workpiece is stamped, the choice of rust-proof oil can be selected according to the following three points
If your stamping parts are in stock and rust-proof for more than one year, it is recommended to choose professional oil film rust-proof oil at this time. Before packaging and storage, seal with rust-proof oil with good rust-proof effect to avoid rust.
If the stamping parts need to be exported by sea transportation in the future, it is recommended to choose anti-rust oil with salt spray performance, such as salt spray anti-rust oil.
If your stamping parts require rust prevention with volatile oil, thin oil film, and anti-rust time of half a year, you can choose anti-rust oil.