News

Stamping parts on automobile bodies are generally divided into cover parts, beam parts and general stamping parts. Stamping parts that can clearly express the image characterist...

Material problem The hardness of the material is too high or uneven, and there are defects such as pores and inclusions in the material, which can easily cause cracks in stampi...

Process requirements for curved stamping parts. When a metal stamping parts processing factory processes curved stamping parts, the process requirements are as follows: 1. The ...

Metal stamping parts manufacturers need to pay attention to some things when processing deep-drawn parts to ensure and improve the quality of deep-drawn parts. Let’s find out wh...

Various problems will occur more or less during the stamping process, and a large part of these problems are caused by very low-level errors. The following summarizes some commo...

Various problems will occur more or less during the stamping process, and a large part of these problems are caused by very low-level errors. The following summarizes some commo...

Causes and solutions of common burrs in blanking parts. Blanking is a stamping process that uses a mold to separate sheet materials. The most common defect of blanking parts is ...

Metal stamping parts manufacturers need to use stamping dies to stamp and process metal stamping parts. Stamping mold designers need to draw mold drawings when designing stampin...

The stamping process plans how many process molds are used to stamp a stamped part product and the basic content of each process. It has a great impact on the design, manufactur...